DC to DC Converters
Insulation Type, 1.5 to 10W Output,
5-year Warranty Period, UL/C-UL Certified(except CCP Type) CC Series
FEATURES
•5-year warranty period.
•With input protection element.
•With output variable terminal (except CCP24).•Input-output floating.
•Shield type of 5-sided metal case.
•External component not required.
•With overcurrent protection function.
•With input remote control (CCN type).
•
Long life without electrolytic capacitor.
•Input voltage alarm function incorporated (CCP-24 type).
•It is a product conforming to RoHS directive.
PART NUMBERS AND RATINGS
CCK TYPE
CCM TYPE
CCN TYPE
CCP TYPE
∗1The same product can be used for the 12V output and the 15V output by using the Vset terminal.∗2The same product can be used for the ±12V output and the ±15V output by using the Vset terminal.∗3The 24V output is used as a single output with the COM. terminal of the ±12V output product open.Conformity to RoHS Directive
Output current Input
voltage
Output voltage
3.3V5V12V∗115V∗1±12V∗2±15V∗224V∗3
1.5W 12V CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212SF CCK-1212DF CCK-1212DF CCK-
1212DF 24V CCK-2403SF CCK-2405SF CCK-2412SF CCK-2412SF CCK-2412DF CCK-2412DF CCK-2412DF
Output current Input
voltage
Output voltage
11223
3W 5V CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512SF CCM-0512DF CCM-0512DF CCM-0512DF 12V CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212SF CCM-1212DF CCM-1212DF CCM-1212DF 48V CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812SF CCM-4812DF CCM-4812DF CCM-4812DF
Output current Input
voltage 3.3V5V12V15V±12V±15V24V
6W 5V CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512SF CCN-0512DF CCN-0512DF CCN-0512DF 24V CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412SF CCN-2412DF CCN-2412DF CCN-2412DF 48V CCN-4803SF CCN-4805SF CCN-4812SF CCN-4812SF CCN-4812DF CCN-4812DF CCN-4812DF
Output current Input
水泥
预制构件voltage
Output voltage
3.3V5V12V
•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
SPECIFICATIONS AND STANDARDS
∗1 Typical input voltage, maximum output current
∗2 Vset and –Vout are shorted.
∗3 Load variation condition of 2-output product: Balance load
∗4 Measurement bandwidth: 50MHz
• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.
• Refer to the description of the application for information about the voltage adjustment method or the like.
OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.PRECAUTIONS
•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.
Part No.CCK-0503SF CCK-0505SF CCK-0512SF CCK-0512DF CCK-1203SF CCK-1205SF CCK-1212SF CCK-1212DF
Maximum output power W 1.3 1.5 1.5 1.5
1.3 1.5 1.5 1.5
Input conditions
Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)
Efficiency∗1%66typ.68typ.70typ.68typ.70typ.73typ.75typ.73typ. Output voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050 Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.
Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150
Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.
Part No.CCK-2403SF CCK-2405SF CCK-2412SF CCK-2412DF CCK-4803SF CCK-4805SF CCK-4812SF CCK-4812DF Maximum output power W 1.3 1.5 1.5 1.5 1.3 1.5 1.5 1.5
Input conditions
Input voltage Edc V18 to 36(24typ.)36 to 72(48typ.)
Efficiency∗1%70typ.75typ.75typ.75typ.70typ.75typ.75typ.75typ. Output characteristics
Output voltage Edc V 3.3512±12 3.3512±12 Output voltage 2∗2 Edc V 3.67615±15 3.67615±15 Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15 Maximum output current mA4003001256040030012560 Maximum output current 2∗2mA3502501005035025010050
Output voltage total variation%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.
Voltage stability Input variation mV2020304020203040 Load variation∗3mV40401006004040100600 Temperature variation mV50501001505050100150
Ripple noise Ep-p∗4mV40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ. mV120max.120max.120max.120max.120max.120max.120max.120max.
SHAPES AND DIMENSIONS
Weight: 6g
Dimensions in mm Tolerance: ±0.3
工业
机器人装配RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]
CIRCUIT DIAGRAMS SINGLE OUTPUT TYPE
CCK-SF SERIES
2-OUTPUT TYPE
CCK-DF SERIES
Oscillating method: Astable frequency method
Oscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONS
TERMINAL PIN CONFIGUTATION No.1+Vin No.3NC No.4–Vout TERMINAL PIN CONFIGUTATION No.1+Vin No.3–Vout
No.4Common out Overcurrent protection Yes Temperature range Operating(°C)–20 to +70[Derating is necessary when operating environment temperature exceed 50°C.]Storage(°C)–40 to +85
Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××Weight
6g
SPECIFICATIONS AND STANDARDS
∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.
∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz
• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.
• Refer to the description of the application for information about the voltage adjustment method or the like.
OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)
•If the operating temperature range is determined based on the case surface temperature, it should be 90°C or lower independently of a load rate.
PRECAUTIONS
•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.
Part No.
CCM-0503SF CCM-0505SF CCM-0512SF CCM-0512DF CCM-1203SF CCM-1205SF CCM-1212SF CCM-1212DF Maximum
output
power W 23332333Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1
%65typ.70typ.72typ.72typ.70typ.75typ.77typ.77typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67
6多媒体操作系统
15
±15 3.67
6
15
±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation
%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage
stability
Input variation
mV 2020304020203040Load variation ∗3
mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4
mV 40typ.40typ.30typ.30typ.40typ.40typ.30typ.30typ.mV
120max.
120max.
120max.
120max.
120max.
120max.
120max.
120max.
Part No.
CCM-2403SF CCM-2405SF CCM-2412SF CCM-2412DF CCM-4803SF CCM-4805SF CCM-4812SF CCM-4812DF Maximum output power W 23332333Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)
Efficiency ∗1
%
70typ.75typ.
78typ.78typ.70typ.75typ.
78typ.78typ.Output characteristics Output voltage Edc V 3.3512±12 3.35
12±12Output voltage 2
∗2 Edc V 3.67615±15 3.676
15
±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 600600250125600600250125Maximum output current 2∗2mA 540500200100540500200100Output voltage total variation
%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage
stability
Input variation mV 2020304020203040Load variation ∗3
mV 40401006004040100600Temperature variation
mV 50501001505050100150Ripple noise Ep-p ∗4
mV 40typ.40typ.30typ.30typ.40typ.
40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.
120max.
120max.
120max.
SHAPES AND DIMENSIONS
Weight:10g
Dimensions in mm Tolerance: ±0.3
RECOMMENDED PWB HOLE SIZE, LOCATION[TOP VIEW]
CIRCUIT DIAGRAMS SINGLE OUTPUT TYPE超前支架
CCM-SF SERIES
2-OUTPUT TYPE
CCM-DF SERIES
Oscillating method: Astable frequency method
Oscillating frequency: Approx. 200kHz[100% load] to approx. 1200kHz[no load]MTTF: 500Fit[2000000h, 100% load]COMMON SPECIFICATIONS
TERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3NC No.5Vset No.6
+Vout
TERMINAL PIN CONFIGUTATION No.1+Vin No.2–Vin No.3–Vout
No.5Vset No.6
+Vout
雨棚信号灯Oscillating method Astable frequency method MTTF
500Fit[2000000h, 100% load]Overcurrent protection Yes Temperature range Storage(°C)–40 to +85
Humidity range Amplitude 10 to 55Hz, all amplitude 1.52mm, sweep time 15min.[3 directions of X, Y, Z, each 2h]Vibration
980m/s 2(100G) 6ms[6 directions, each 3 times]
Insulation resistance Input to output, input to case, output to case: 50M Ω min.[DC.500V]Safety standards UL60950, CSA60950(C-UL) certified ××××
SPECIFICATIONS AND STANDARDS
∗1 Typical input voltage, maximum output current ∗2 Vset and –Vout are shorted.
∗3 Load variation condition of 2-output product: Balance load ∗4 Measurement bandwidth: 50MHz
• The 2-output product can be used as a single output of 24V to 30V with the COM. terminal open.
• Refer to the description of the application for information about the voltage adjustment method or the like.
OUTPUT POWER - AMBIENT TEMPERATURE(DERATING)
•If the operating temperature range is determined based on the case
surface temperature, it should be 90°C or lower independently of a load rate.
PRECAUTIONS
•Parallel operation to increase output current is not possible.•Since the converter is entirely shielded by a metal case, care should be taken to isolate the case from the surrounding compo-nents and wiring pattern.
Part No.
CCN-0503SF CCN-0505SF CCN-0512SF CCN-0512DF CCN-1203SF CCN-1205SF CCN-1212SF CCN-1212DF Maximum
output
power W 45665666Input conditions Input voltage Edc V 4.5 to 9(5typ.)9 to 18(12typ.)Efficiency ∗1
%70typ.74typ.78typ.76typ.73typ.80typ.85typ.85typ.Output voltage Edc V 3.3512±12 3.3512±12Output voltage 2∗2 Edc V 3.67
6
15
±15 3.67
6
15
±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1200100050025015001200500250Maximum output current 2∗2mA 100080040020013001000400200Output voltage total variation
%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage
stability
Input variation
mV 2020304020203040Load variation ∗3
mV 40401006004040100600Temperature variation mV 50501001505050100150Ripple noise Ep-p ∗4
mV 60typ.40typ.30typ.30typ.60typ.40typ.30typ.30typ.mV
120max.
120max.
120max.
120max.
120max.
120max.
120max.
120max.
Part No.
CCN-2403SF CCN-2405SF CCN-2412SF CCN-2412DF CCN-4803SF CCN-4805SF CCN-4812SF
CCN-4812DF Maximum output power W 56665666Input conditions Input voltage Edc V 18 to 36(24typ.)36 to 72(48typ.)
Efficiency ∗1
%
77typ.82typ.
85typ.85typ.77typ.80typ.
85typ.85typ.Output characteristics Output voltage Edc V 3.3512±12 3.35
12±12Output voltage 2
∗2 Edc V 3.67615±15 3.676
15
±15Voltage variable range Edc V 2.84 to 3.67 4.3 to 612 to 1512 to 15 2.84 to 3.67 4.3 to 612 to 1512 to 15Maximum output current mA 1500120050025015001200500250Maximum output current
2∗2mA 1300100040020013001000400200Output voltage total variation
%±5max.±5max.±5max.±5max.±5max.±5max.±5max.±5max.Voltage
stability
Input variation mV 2020304020203040Load variation ∗3
mV 40401006004040100600Temperature variation
mV 50501001505050100150Ripple noise Ep-p ∗4
mV 60typ.40typ.30typ.30typ.60typ.冷却塔平衡管
40typ.30typ.30typ.mV 120max.120max.120max.120max.120max.
120max.
120max.
120max.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议