Reducing coupling 变径接头
T-coupling T型管接头飞行棋棋盘
T-piece 三通
Flat steel bar 扁钢棒
PTFE strip 聚四氟乙烯带
Reducing welding cone 焊接锥体
Weld-on pipe coupling 焊接式管接头
Sleeve 套筒
Straight male stud 直通外螺柱
Union nut 管接螺母
Cap 管帽
Socket 套管
Ring gasket 密封圈
Water trap 脱水器
Edger 立辊
Crop Shears 切头剪
Roughing Mill 粗轧机
Finishing Mill 精轧机
Trimming Shear 切边剪
Coiler 卷取机
Media systems 介质系统
Mill piping and accessories 轧机管线和附件
Hot Coil conveyor system 热卷运输系统
Rollers, grids, bearing blocks, motor base
辊子、护板，轴承块，电机底座
Approach roller table 入口辊道 Flexible couplings (tire type) 弹性联轴节（轮箍式）
Sealings 密封
Bearings 轴承
Grease lubrication 油脂润滑
Piping 管路，缩孔
Emulsion spray 乳化剂喷嘴
Roller 辊子
Barrel 桶，卷筒
Ingot cleaning device 铸锭清洗装置 Cleaning hood 清洗罩
hydraulic cylinder for top header 上集管液压缸
Emulsion piping for headers 集气管乳化液管线
Hoses for emulsion piping 乳化液管线软管
Control valves 控制阀
Spray nozzles 喷嘴
Bearings 轴承
Bearings for guide rollers 导辊轴承
Wear plates 耐磨板
Rack and pinion 齿条和齿轮
Hydraulic cylinder 液压缸
1111sVertical edger 立辊
Edger base plates 立辊底板
Edger mill frame assembly 立辊轧机框架装配
Track rails, spacers 轨道、垫块
Edger, Roughing Mill and Crop Shears立辊、粗轧机和切头剪
Roughing mill entry equipment粗轧机入口设备
Roughing mill approach roller table粗轧机入口辊道
5,600 mm approach roller table 5600 mm 入口辊道
插座保护盖
4,100 mm approach roller table 4100 mm 入口辊道
Ingot cleaning device 铸锭清洗装置
Entry operating roller table in front of the edger 立辊前入口操作辊道
稳压电源模块Entry side guides in front of the edger立辊前侧导卫
Vertical edger立辊
Edger base plates立辊底板
Edger mill frame assembly立辊轧机框架装配
Feed roller机架辊
Roll balancing轧辊平衡
Mechanical screw down system机械压下系统
Edger roll chocks立辊轴承座婴幼儿服装裁剪
Edger roll bearings 立辊轴承
Edger rolls with labyrinth rings立辊带有迷宫环
Edger main drive equipment立辊主传动设备
Gear unit减速机
universal drive spindles incl sleeves (motor side)
万向轴包括套管（电机侧）
universal drive spindles incl sleeves (roll side)
万向轴带有套管（辊侧）
Wobbler holding device接轴头把持装置
Vertical edger maintenance platform立辊维修平台
Edger stand piping立辊轧机管线
Auxiliary equipment edger立辊的辅助设备
Dismantling device for edger rolls立辊拆卸装置
Dismantling device for edger gear box立辊减速机拆卸装置
Dismantling device for mech. screw down机械压下拆卸装置
Dismantling device for balancing cylinder incl. Lifting ropes
平衡缸拆卸装置包括提升钢丝绳
Dismantling Device for edger main drive spindle
立辊主传动轴拆卸装置
Equipment between Edger and Roughing Mill
立辊和粗轧机之间设备
Entry operating roller table in front of the roughing mill (Turn Table) 粗轧机前入口操作辊道（回转辊道）
Entry side guides in front of RM粗轧机前入口侧导卫
Roughing mill equipment粗轧机设备
Bed plates底板
Roughing mill housing粗轧机牌坊
Back-up roll balancing支撑辊平衡
Mechanical screw down system机械压下系统
Hydraulic AGC cylinder for Roughing Mill粗轧机液压AGC缸
Work roll bending / balancing system工作辊顶弯/平衡系统 Work rolls工作辊
Work roll bearings工作辊轴承
Work roll chocks工作辊轴承座
Work roll stripper工作辊推板
Work roll brushes工作辊刷辊
Back-up rolls支撑辊
Back-up roll bearings支撑辊轴承
Back-up roll chocks支撑辊轴承座
Work roll change rails工作辊换辊轨道
Back-up roll change rails支撑辊换辊轨道
Entry and delivery strip guides入口和出口铝板导卫
Work roll cooling at the entry and delivery guides
工作辊冷却，在入口和出口导卫上
Breast rollers机架辊
Drive spindles传动轴
Drive spindle balancing传动轴平衡
Work roll changing device工作辊换辊装置
Back-up roll changing device支撑辊换辊装置
Mill stand piping轧机管线
Mill platform轧机平台
Mill side covers, cladding轧机侧盖，围板
Fume exhaust equipment at the mill轧机上排烟设备
Fume exhaust system排烟系统
Fire extinguishing pipes消防管线
Mill stand cleaning pipes轧机清洗管线
Auxiliary equipment Roughing Mill粗轧机辅助设备
Top Back-up roll changing stool上支撑辊更换凳
Back-up roll lifting device支撑辊吊具
Work roll lifting device incl. lifting ropes工作辊吊具包括钢丝绳
Dismantling device for breast rollers机架辊拆卸装置
Changing device for hydraulic gap adjustment cylinder
液压辊缝调节缸更换装置
Lifting tackle for mill housing轧机牌坊吊具
Table roller cleaning device辊道清洗装置
si69
Roughing Mill exit side equipment粗轧出口设备
Roughing Mill exit side operating roller table粗轧机出口侧操作辊道
Roughing Mill exit side guide粗轧机出口侧导卫
Roughing Mill exit roller table粗轧机出口辊道
Crop shear T1.2 equipment切头剪 T2.1设备
Heavy crop shear T1.2重剪T1.2
Heavy crop shear T1.2 base plate重剪T1.2底座
Scrap push-off device废料推出装置
Scrap removal system废料移出系统
Scrap pallets废料托盘
Scrap marking device废料打号装置
Lowerable roller table in front of T1.2
T1.2剪前升降辊道
Shifting and lowerable roller table behind shear T1.2
T1.2剪后移动和升降辊道
Heavy plate unloading device厚板卸板装置
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议