拉画笔
铜模浇铸阳极铜脱模剂的应用摇臂
作者：马涛等钢领
直埋电缆盖板>丙烯酸羟丁酯
来源：《价值工程》2015年第07期 回收太阳能电池片 摘要： 介绍了阳极铜浇铸工艺中硫酸钡脱模剂的使用现状，在此基础上研究了粒度、添加物以及水分对脱模剂使用的影响，通过生产实验得到了脱模剂的优化条件：添加10%B2O3、40%SiO2、5%Al2O3、5%CaO，添加物粒度150-200在目的范围，铜模预热温度200℃-220℃；提出了一种改善脱模剂使用效果的研究路线。 Abstract： This paper described current situation of using barium sulfate as mold discharging agent in anode-copper casting process， based on which， effects of particle size， additives and water on performance of the mold discharging agent were studied. Then， optimized operating parameters for this mold discharging agent were obtained through production experiments， in details， by adding 10% B2O3， 40% SiO2， 5% Al2O3 and 5% CaO， making the additive particle size in the range of 150-200 mesh， and controlling the mold preheat temperature between 200 and 220 degrees Celsius. At last， a research route for improving effectiveness of the discharging agent was also proposed.
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议