Optoway
BTRS-5640G
***********************************************************************************************************************************************************************
***********************************************************************************************************************************************************************
薯片加工
设备OPTOWAY TECHNOLOGY INC. No .38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
E-mail: w http: // w 10/1/2005 V3.0
1
BTRS-5640G / BTRS-5640-SPG / BTRS-5640AG / BTRS-5640A-SPG
1310 nm TX / 1550 nm RX , 3.3V / 622 Mbps RoHS Compliant Single-Fiber Transceiver
**********************************************************************************************************************************************************************
滤油机滤布
FEATURES
l Single Fiber Bi-Directional Transceiver l 1310 nm Transmitter l 1550 nm Receiver l Distance Up to 40 km
l Single +3.3 V Power Supply l Speed up to 650 Mb/s l RoHS Compliant
l PECL Differential Inputs and Outputs
l 0 to 70o C Operating Temperature: BTR-5640G l -20 to 85o C Operating Temperature: BTR-5640AG l Wave Solderable and Aqueous Washable
l Class 1 Laser International Safety Standard IEC-60825 Compliant
APPLICATIONS
l WDM 622 Mb/s Links
l SONET/SDH Equipment Interconnect l Fast Ethernet & Fiber Channel Links DESCRIPTION
The BTRS-5640G series is high performance module for single fiber communications by using 1310
nm transmitter and 1550 nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated 1550 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry.
LASER SAFETY
This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug.
ORDER INFORMATION
P/No.
Bit Rate (Mb/s) Distance (km) TX (nm) RX (nm) Voltage (V) Package Temp (o C)
TX
Power (dBm) RX Sens. (dBm) RoHS Compliant BTRS-5640G
622 40 1310 1550 3.3 2X5 SC 0 to 70 0 to -5 -28 Yes BTRS-5640AG
622
40
1550
3.3
2X5 SC -20 to 85
0 to -5 -28 Yes
Note: 1. BTRX-XXXXXG is receptacle type package with standard case 2. BTRX-XXXXXEG is receptacle type package with extended case
3. BTRX-XXXXX-APBBBG is pigtail type package with different connector, A=S is SC connector, A=F is FC
connector, A=T is ST connector, A=L is LC connector, A=M is MU connector; BBB is the length of fiber in cm.
*********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No .38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798 Fax: 886-3-5979737
Absolute Maximum Ratings
Parameter
Symbol
Min Max Units Notes
Storage Temperature Tstg -40 85 o C
Operating Temperature Topr 0 -20 70 85 o C
BTR-5640G BTR-5640AG
Soldering Temperature --- 260 o
C 10 seconds on leads only Power Supply Voltage Vcc 0 4.5 V Input Voltage --- GN
D Vcc V
Output Current
Iout
30
mA
Recommended Operating Conditions
Parameter
Symbol Min Typ Max Units / Notes
Power Supply Voltage Vcc 3.13 3.3 3.47 V Operating Temperature Topr 0 -20 70 85 o一次性手腕带
C / BTR-5640G o
C / BTR-5640AG
Data Rate
50 622 650 Mb/s Power Supply Current
260
mA
Transmitter Specifications (0o C < Topr < 70o C, 3.13V < Vcc < 3. 47V)
Parameter
Symbol
Min
Typ
Max
Units
Notes
Optical
Optical Transmit Power Po -5 0 dBm 1
Output Center Wavelength λ
1285 1310 1345 nm Output Spectrum Width σλ
2 nm RMS (σ) Extinction Ratio E R 10 dB Output Eye
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
Optical Rise Time t r 1.2 ns 10% to 90% Values Optical Fall Time
t f 1.2 ns 10% to 90% Values Relative Intensity Noise RIN -120 dB/Hz Total Jitter TJ 0.55 ns 2 Electrical
Data Input Current – Low I IL -350 µA Data Input Current – High I IH 350 µA Differential Input Voltage V IH - V IL 300 1600 mV
Data Input Voltage – Low V IL - V CC -2.0 -1.58 V 3 Data Input Voltage -- High V IH - V CC -1.1 -0.74 V 3
Disable Input Voltage -- Low V TDIS,L 0 0.8 V TX Output Enabled Disable Input Voltage -- High V TDIS,H Vcc – 1.3
Vcc V TX Ouput Disabled
Shut Off Time for TxDis
t DIS
1
ms
Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber.
2. Measured with a 223-1 PRBS with 72 ones and 72 zeros.
3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs.
********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
RECOMMENDED CIRCUIT SCHEMATIC
1)Recommended DC Coupled Interface Circuit
2)Recommended AC Coupled Interface Circuit
********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
********************************************************************************************************************************************************************* OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
铆压机
豫公网安备41160202000603
站长QQ:729038198
关于我们
投诉建议