BeltSpecification

ANNEXURE-I TO TE NO.55N051454, DATA SHEET/ DETAILED SPECIFICATIONS

OF CONVEYOR BELT

1. TYPE OF BELT :

 BELT STRENGTH IN KN/M. OF BELT WIDTH/

NO. OF PLIES :1400/4,

 THICKNESS OF TOP & BOTTOM RUBBER :5mm & 2mm,

 TOTAL THICKNESS :15.3mm,

 OTHER DETAILS :FR GRADE, TYPE-III HEAVY DUTY, OPEN

END, CUT EDGE CONSTRUCTION, SKIM

COATED PLIES, ALL NYLON,

 BELT WIDTH :1400mm,

1. MATERIAL CODE NO. :5504042563

2. ELONGATION AT REFERENCE LOAD :3% Max.

3. BREAK ELONGATION :10% Min.

4. ADHESION PROPERTY(Min.) :

 TOP COVER TO PLY (IN KN/Mtr. OF WIDTH) :4.5,

 PLY TO PLY (IN KN/Mtr. OF WIDTH) :5.25,

 PLY TO BOTTOM COVER (IN KN/Mtr. OF WIDTH) :4.5,

5. COVER RUBBER PROPERTIES :

 TENSILE STRENGTH :17MN/SQ.M (Min.)

 ELONGATION AT BREAK :350%Min.

0 (CHANGE IN % AFTER AGEING FOR 72 Hrs. AT 70+1 C)

 TENSILE STRENGTH :+10%, -20% Max.

 ELONGATION AT BREAK :+10%, -25% Max.

 ABRASION LOSS (AS PER DIN-53516) :250 mm-cube Max.

 TEAR RESISTANCE (AS PER DIN-53507) :SENSE- A : 20N/mm, SENSE- B: 12N/mm,

 SHORE HARDNESS :71 + / - 5 A,

7. TROUGHABILITY :AS PER IS –1891

8. FR GRADE TEST AS PER STANDARD :CAN/CSA - M422- M87, TYPE - C

10. LENGTH VARIATION :+2%, -0.5%,

11. LENGTH OF BELT IN ONE ROLL :200 Mtrs.

12. PATCH REPAIR NORMS: REPAIRS BELOW 25 MM X 25MM SIZE SHALL NOT

CONSIDERED AS REPAIRS.

B. NOT MOR THAN 5 REPAIRS PER 100 MR LENGTH SHALL BE

OF REPAIRS SHALL BE CONTAINED

WITHIN A SQUARE OF 1/5W X 1/5 W, WHERE “W” IS WIDTH OF

BELT.

STANDARD TO BE FOLLOWED :IS-1891,LATEST

MARKING ON THE BELT : EVERY 10 MTRS INTERVAL,

PACKING : STANDARD WOODEN WITH STEEL CORE,

DATA SHEET/ DETAIL SPECIFICATIONS OF CONVEYOR BELT ( ANNEXURE –1 TO TE NO.55N051454

1. TYPE OF BELT :

 BELT STRENGTH IN KN/M. OF BELT WIDTH/

NO. OF PLIES : 800 /4

 THICKNESS OF TOP & BOTTOM RUBBER : 5mm & 2mm,

 TOTAL THICKNESS : 14.2mm

 OTHER DETAILS : FR GRADE, TYPE-III

HEAVY DUTY, OPEN

END, CUT EDGE CON-

STRUCTION, SKIM COATED

PLIES, ALL NYLON,

 BELT WIDTH : 1400mm,

1. MATERIAL CODE NO. : 5504042572

2. ELONGATION AT REFERENCE LOAD : 3% Max.,

3. BREAK ELONGATION : 10% Min.

4. ADHESION PROPERTY(Min.) :

 TOP COVER TO PLY (IN KN/Mtr. OF WIDTH) : 4.5,

 PLY TO PLY (IN KN/Mtr. OF WIDTH) : 5.25,

 PLY TO BOTTOM COVER (IN KN/Mtr. OF WIDTH) : 4.5,

5. COVER RUBBER PROPERTIES :

 TENSILE STRENGTH : 15 MN/SQ.M ( Min.)

 ELONGATION AT BREAK : 350%Min.

0 (CHANGE IN % AFTER AGEING FOR 72 Hrs. AT 70+1C)

 TENSILE STRENGTH : +10%, -20% Max.

 ELONGATION AT BREAK : +10%, -25% Max.

 ABRASION LOSS (AS PER DIN-53516) : 300 mm-cube (Max.)

 TEAR RESISTANCE (AS PER DIN-53507) : SENSE- A : 20N/mm,

SENSE- B : 12N/mm,

 SHORE HARDNESS : 71 + / - 5 deg. A,

ABILITY : AS PER IS -1891

8. FR GRADE TEST AS PER STANDARD : CAN/CSA - M422-

M87 , TYPE - C

VARIATION : +2%, -0.5%,

OF BELT IN ONE ROLL : 200 Mtrs.

11. PATCH REPAIR NORMS : REPAIRS BELOW 25 MM X 25MM SIZE SHALL NOT

CONSIDERED AS REPAIRS.

B. NOT MORE THAN 5 REPAIRS PER 100 MR LENGTH SHALL BE

OF REPAIRS SHALL BE CONTAINED WITHIN A SQUARE

OF 1/5W X 1/5 W, WHERE “W” IS WIDTH OF BELT.

RD TO BE FOLLOWED : IS-1891 LATEST,

G ON THE BELT : EVERY 10 MTRS.

INTERVAL,

G : STANDARD WOODEN

WITH STEEL CORE,

ANNEXURE-1 TO PI SR 50063 , dated 24.11.2005 DATA SHEET/

DETAILED SPECIFICATIONS OF CONVEYOR BELT

2. TYPE OF BELT :

 BELT STRENGTH IN KN/M. OF BELT WIDTH/

NO. OF PLIES : 1000/4,

 THICKNESS OF TOP & BOTTOM RUBBER : 3mm & 2mm,

 TOTAL THICKNESS : 12.2mm,

 OTHER DETAILS : FR GRADE, TYPE-III

HEAVY DUTY, OPEN

END, CUT EDGE CON- STRUCTION,

SKIM COATED PLIES, ALL

NYLON,

 BELT WIDTH : 1400mm,

6. MATERIAL CODE NO. : 5567059034,

7. ELONGATION AT REFERENCE LOAD : 3% Max.,

8. BREAK ELONGATION : 10% Min

9. ADHESION PROPERTY(Min.) :

 TOP COVER TO PLY (IN KN/Mtr. OF WIDTH) : 4.5,

 PLY TO PLY (IN KN/Mtr. OF WIDTH) : 5.25,

 PLY TO BOTTOM COVER (IN KN/Mtr. OF WIDTH): 4.5,

10. COVER RUBBER PROPERTIES :

 TENSILE STRENGTH : 15 MN / SQ.M (Min.)

 ELONGATION AT BREAK : 350%Min.

0 (CHANGE IN % AFTER AGEING FOR 72 Hrs. AT 70+1 C)

 TENSILE STRENGTH : +10%, -20% Max.

 ELONGATION AT BREAK : +10%, -25% Max.

 ABRASION LOSS (AS PER DIN-53516) : 300 mm-cube Max.

 TEAR RESISTANCE (AS PER DIN-53507) : SENSE- A : 20N/mm,

SENSE- B : 12N/mm,

 SHORE HARDNESS : 71 + / - 5 deg. A,

7. FR GRADE TEST AS PER STANDARD : CAN/CSA - M422- M87 , TYPE - C

8. TROUGHABILITY : AS PER IS 1891 ,LATEST

9. TYPE OF FABRIC : NYLON-66,

10. LENGTH VARIATION : +2%, -0.5%,

11. LENGTH OF BELT IN ONE ROLL : 250 Mtrs.

12. PATCH REPAIR NORMS : REPAIRS BELOW 25 MM X 25MM SIZE

SHALL NOT BE CONSIDERED AS REPAIRS

B. NOT MOR THAN 5 REPAIRS PER 100 MR LENGTH SHALL BE

OF REPAIRS SHALL BE CONTAINED WITHIN A SQUARE

OF 1/5W X 1/5 W, WHERE “W” IS WIDTH OF BELT.

13. MARKING ON THE BELT : EVERY 10 MTRS.

INTERVAL,

14. PACKING : STANDARD WOODEN

WITH STEEL CORE,

15. STANDARD TO BE FOLLOWED : IS-1891,LATEST

ANNEXURE-I : DATA SHEET/ DETAILED SPECIFICATIONS OF CONVEYOR BELT

3. TYPE OF BELT :

 BELT STRENGTH IN KN/M. OF BELT WIDTH/

NO. OF PLIES : 1600/5,

 THICKNESS OF TOP & BOTTOM RUBBER : 3mm & 2mm,

 TOTAL THICKNESS : 16.6mm,

 OTHER DETAILS : FR GRADE, TYPE-III

HEAVY DUTY, OPEN

END, CUT EDGE CON- STRUCTION,

SKIM COATED PLIES, ALL

NYLON,

 BELT WIDTH : 1400mm,

11. MATERIAL CODE NO. : 5567059052,

12. ELONGATION AT REFERENCE LOAD : 3% Max.,

13. BREAK ELONGATION : 10% Min

14. ADHESION PROPERTY(Min.) :

 TOP COVER TO PLY (IN KN/Mtr. OF WIDTH) : 4.5,

 PLY TO PLY (IN KN/Mtr. OF WIDTH) : 5.25,

 PLY TO BOTTOM COVER (IN KN/Mtr. OF WIDTH): 4.5,

15. COVER RUBBER PROPERTIES :

 TENSILE STRENGTH : 15 MN / SQ.M (Min.)

 ELONGATION AT BREAK : 350%Min.

0 (CHANGE IN % AFTER AGEING FOR 72 Hrs. AT 70+1 C)

 TENSILE STRENGTH : +10%, -20% Max.

 ELONGATION AT BREAK : +10%, -25% Max.

 ABRASION LOSS (AS PER DIN-53516) : 300 mm-cube Max.

 TEAR RESISTANCE (AS PER DIN-53507) : SENSE- A : 20N/mm,

SENSE- B : 12N/mm,

 SHORE HARDNESS : 71 + / - 5 deg. A,

7. FR GRADE TEST AS PER STANDARD : CAN/CSA - M422- M87 , TYPE - C

8. TROUGHABILITY : AS PER IS 1891 ,LATEST

9. TYPE OF FABRIC : NYLON-66,

10. LENGTH VARIATION : +2%, -0.5%,

11. LENGTH OF BELT IN ONE ROLL : 200 Mtrs. or 250mtrs

12. PATCH REPAIR NORMS : REPAIRS BELOW 25 MM X 25MM SIZE

SHALL NOT BE CONSIDERED AS REPAIRS

B. NOT MOR THAN 5 REPAIRS PER 100 MR LENGTH SHALL BE

OF REPAIRS SHALL BE CONTAINED WITHIN A SQUARE

OF 1/5W X 1/5 W, WHERE “W” IS WIDTH OF BELT.

13. MARKING ON THE BELT : EVERY 10 MTRS.

INTERVAL,

14. PACKING : STANDARD WOODEN

WITH STEEL CORE,

15. STANDARD TO BE FOLLOWED : IS-1891,LATEST