ENGINE_EXHAUST


2023年12月22日发(作者:ssd硬盘固态硬盘的区别)

AENAW1011B01001Page 1 of 11KExhaust System DescriptionThe exhaust system consists of a exhaust manifold with a Warm Up Three-Way Catalytic

converter (WU-TWC), exhaust No.1 pipe with a Three-Way Catalytic converter (TWC),

exhaust No.2 pipe, a muffler, a gasket, etc. The WU-TWC and TWC are emission control

devices which are added to the exhaust to lower the levels of Hydrocarbon (HC), Carbon

Monoxide (CO), and Oxides of Nitrogen (NOx) pollutants in the exhaust gas. A large capacity

sub-muffler is combined with the exhaust pipe No.2 for reducing booming noises at low-mid

engine speeds. The adoption of a dual muffler produces low exhaust resistance and low back

pressure, improves engine power and keeps exhaust noise :///Media/Manuals/Kizashi/2010/Service_7/20/2010

AENAW1011B04001Page 1 of 11KExhaust System CheckWARNING:

In order to help avoid getting burned, do not work on exhaust system when it

is hot. Exhaust system must be sufficiently cool before beginning any service

on the exhaust system at every periodic vehicle inspection and when the vehicle is

hoisted for other service noting the following points:•Check rubber mountings for damage deterioration and incorrect position.

•••••Check mating surface of cylinder head with exhaust manifold for distortion.

Check exhaust system for exhaust gas leakage, loose connection, dent and damage.

Check if bolts or nuts are loosened, and then tighten them to specified torque.

Check any damages, holes or cracks which may permit exhaust gas to enter the vehicle.

Check to make sure that exhaust system components have enough clearance from other

underbody components to avoid overheating and possible damage to these components.

•Check for any defects and fix them whenever found.

/Media/Manuals/Kizashi/2010/Service_7/20/2010otherk

AENAW1011B06001Page 1 of 21KExhaust System Components[A]: 2WD model[B]: 4WD Exhaust manifold stiffener

bolt

: For tightening order,

refer to

Exhaust Manifold

Removal and r LMuffler t manifold t manifold protector panel No.

3Heat protector rear panel

LHeat protector rear panel

R50 N

本文发布于:2024-09-22 12:37:34,感谢您对本站的认可!

本文链接:https://www.17tex.com/fanyi/24587.html

版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。

标签:硬盘   固态   区别
留言与评论(共有 0 条评论)
   
验证码:
Copyright ©2019-2024 Comsenz Inc.Powered by © 易纺专利技术学习网 豫ICP备2022007602号 豫公网安备41160202000603 站长QQ:729038198 关于我们 投诉建议