ANSI | BS | DIN | EN | GB | ISO | JIS | NF
| DIC
编号
中文名称
架空线路架设用镀锌铁制螺栓型带导向螺纹的绝缘子柱销
英文名称
Insulator Pins with Lead
Threads for Overhead Line
Construction, Galvanized
Ferrous Bolt-Type
ANSI
C135.17-1988
ANSI/API
Std.600-2001
ANSI/ASME
B18.10-2006
ANSI/ASME
B18.15-1985
ANSI/ASME
B18.2.1-1996
ANSI/ASME
B18.2.1a-1999
石油和天然气工业Bolted Bonnet Steel Gate
用螺栓接合钢制帽Valves for Petroleum and
状阀门
Natural Gas Industries
轨道螺栓及螺母
Track Bolt and Nuts
锻造有眼螺栓
Forged Eyebolts
四方和六角形螺栓Square and Hex Bolts and
和螺钉(英寸系列)
Screws (Inch Series)
四方和六角形螺栓Square and Hex Bolts and
和螺钉(英制系列)
Screws (Inch Series)
ANSI/ASME 四方头螺栓(米制系Square Head Bolts (Metric
B18.2.3.10M-1996
列)
Series)
ANSI/ASME
米制六角形螺栓
B18.2.3.5M-1979
ANSI/ASME
米制重六角形螺栓
B18.2.3.6M-1979
Bolts, Metric Hex
Bolts, Metric Heavy Hex
ANSI/ASME 米制重六角形结构Bolts, Metric Heavy Hex
B18.2.3.7M-1979
螺栓
Structural
ANSI/ASME
B18.2.8-1999
ANSI/ASME
B18.2.9-2007
螺栓、螺钉和螺柱的Clearance Holes for Bolts,
通孔
Screws and Studs
Straightness Gage and
螺栓和螺钉用平直Gaging for Bolts and
度量规和精确计量
Screws
ANSI/ASME
B18.5-1990
圆头螺栓(英寸系Round Head Bolts (Inch
列)
Series)
ANSI/ASME 米制园头短方颈杆Metric Round Head Short
B18.5.2.1M-2006
的螺栓
Square Neck Bolts
ANSI/ASME
米制圆头方颈螺栓
B18.5.2.2M-1982
Bolts, Metric Round Head
Square Neck
Round Head Square Neck
ANSI/ASME 米制大圆头方颈螺Bolts With Large Head
B18.5.2.3M-1990
栓
(Metric)
ANSI/ASME
B18.9-2007
ANSI/ASME
B5.1M-1985
ANSI/ASME
PCC-1-2005
防松螺栓
Plow Bolts
T型槽.T型槽螺栓、T-Slots - Their Bolts, Nuts,
螺母和榫舌
and Tongues
压力限制螺栓连接Guidelines for Pressure
法兰联轴节组件的Boundary Bolted Flange
导则
Joint Assembly
Specification for
高温设备用合金钢Alloy-Steel and Stainless
和不锈钢螺栓材料Steel Bolting Materials for
规范
High-Temperature Service
Specification for Carbon
高压和高温设备用and Alloy Steel Nuts for
碳素钢与合金钢螺Bolts for High-Pressure
栓和螺母规范
and High-Temperature
Service
Specification for
低温设备用合金钢Alloy-Steel Bolting
螺栓材料规范
Materials for
Low-Temperature Service
Specification for Manhole
半埋入式防油、防Cover Assembly, Bolted,
水、螺栓连接人孔盖Semi-Flush, Oiltight and
组件规范
Watertight
半埋入式防油、防水Specification for Manhole
螺栓连接的人孔盖Cover Assembly, Bolted,
组件规范
Hinged, Semi-Flush,
ANSI/ASTM
A193/A
193M-2001
ANSI/ASTM
A194/A
194M-2001
ANSI/ASTM
A320/A
320M-2001
ANSI/ASTM
F1142-1990
ANSI/ASTM
F1144-1990
Oiltight and Watertight
Practice for Inspection
螺栓螺纹锁定厌氧Procedure for Use of
复合物检验程序惯Anaerobic Thread Locking
例
Compounds with Studs
管道系统法兰接头Practice for Selecting
用螺栓长度的选用Bolting Lengths for Piping
惯例
System Flanged Joints
Water
储水用加工涂覆螺Factory-Coated
栓连接钢罐
Steel Tanks for
Storage,
Bolted
ANSI/ASTM
F1179-1997
ANSI/ASTM
F704-1997
ANSI/AWWA
D103-1997
ANSI/IEEE
C135.1-1999
Standard for Zinc-Coated
架空线结构用镀锌Steel Bolts and Nuts for
钢螺栓和螺母标准
Overhead Line
Construction
普通螺栓、螺钉和双Surface Discontinuities on
头螺栓的表面不均General Application Bolts,
匀性
Screws, and Studs
Surface Discontinuities on
螺栓、螺纹、螺母表Bolts, Screws, and Studs in
面断续疲劳试验
Fatigue Applications
紧固件.零件标准帽Fasteners - Part Standard
螺钉、六角头螺栓和Cap Screws, Hex Bolts,
六角螺母
and Hex Nuts
建筑和工业机械用Bolt and Capscrew Sizes
螺栓和有头螺钉尺for Use in Construction
寸
and Industrial Machinery
Holes in Bolt and Screw
扁销用螺栓孔与螺Shanks and Slots in Nuts
母螺杆尾和槽
for Cotter Pins
Hydraulic Flanged Tube,
四螺栓拼合法兰型Pipe, and Hose
液压法兰管、管道及Connections, Four-Bolt
软管接头
Split Flange Type
制动衬片铆钉和制Rivets for Brake Linings
动块螺栓
and Bolts for Brake Blocks
ANSI/SAE
J1061-1992
ANSI/SAE
J123-1994
ANSI/SAE
J2295-1998
ANSI/SAE
J370-1998
ANSI/SAE
J485-1998
ANSI/SAE
J518-1993
ANSI/SAE
J663-1994
方头和六角头螺栓ASME B 18.2.1 和螺钉(英寸系列).Erratum-2003
对ASME B
18.2.1-1996的勘误
ASME
B18.10-1982
ASME
B18.2.1-1996
道轨用螺栓和螺母
(Square and hex bolts and
screws (Inch series);
Erratum to ASME
B18.2.1-1996)
(Track bolts and nuts)
英制方头和六角头(Square and hex bolts and
螺栓和螺钉(英制系screws (Inch series))
列)
方头和六角头螺栓(Square and hex bolts and
ASME B18.2.1a
和螺钉(英制系列).screws (inch series);
Addenda-1999
附录
Addenda)
ASME
B18.2.3.5M
Errata-1981
米制六角头螺栓,正(Metric hex bolts; Errata)
误表
ASME
米制六角头螺栓
B18.2.3.5M-1979
ASME
B18.2.3.6M
Errata-1981
(Metric hex bolts)
米制重型六角头螺(Metric heavy hex bolts;
栓,正误表
Errata)
ASME 米制重型六角头螺(Metric heavy hex bolts)
B18.2.3.6M-1979
栓
ASME
B18.2.3.7M
Errata-1981
米制重型六角头结(Metric heavy hex
构螺栓,正误表
structural bolts; Errata)
hex ASME 米制加重六角头结(Metric heavy
B18.2.3.7M-1979
构螺栓
structural bolts)
ASME
B18.5-1990
ASME
B18.5.2.1M
Erratum-2003
英制圆头螺栓
(Round head bolts (Inch
series))
米制圆头短方颈螺(Metric round head short
栓.技术勘误
square neck bolts; Erratum)
ASME 米制圆头短方颈螺(Metric round head short
B18.5.2.1M-1996
栓
square neck bolts)
ASME 米制圆头方颈螺栓
(Metric round head square
B18.5.2.2M-1982
neck bolts)
(Round head square neck
ASME 带大头的米制圆头bolts with large head
B18.5.2.3M-1990
方颈螺栓
(Metric series))
ASME
B18.9-1996
ASME
B5.1M-1985
ASME
PCC-1-2000
防松螺栓(英制系(Plow bolts (inch series))
列)
T型槽及其螺栓.螺(T-slots, their bolts, nuts,
母和榫舌
and tongues)
(Guidelines for pressure
压力边界螺栓法兰boundary bolted flange
连接组件导则
joint assembly)
Standard Specification for
高温设备用沉淀硬Precipitation-Hardening
ASTM A 1014/A
化螺栓材料(UNS Bolting Material (UNS
1014M-2006
N07718)的标准规范
N07718) for High
Temperature Service
ASTM
183-2003
Standard Specification for
A 碳素钢制轨条螺栓Carbon Steel Track Bolts
和螺母的标准规范
and Nuts
Standard Specification for
Alloy-Steel and Stainless
Steel Bolting Materials for
High Temperature or High
Pressure Service and Other
Special Purpose
Applications
高温或高压设备及其他特殊用途的合ASTM A 193/A
金钢和不锈钢螺栓193M-2007
连接材料用标准规范
Standard Specification for
高压或高温设备或Carbon and Alloy Steel
ASTM A 194/A 高压高温设备的螺Nuts for Bolts for High
194Ma-2007
栓用碳素钢与合金Pressure or High
钢螺母的标准规范
Temperature Service, or
Both
抗拉强度为A 60000PSI的碳素钢螺栓和柱头螺栓用标准规范
Standard Specification for
Carbon Steel Bolts and
Studs, 60 000 PSI Tensile
Strength
ASTM
307a-2007
ASTM A 320/A 低温设备用合金钢Standard Specification for
320Ma-2007
和不锈钢螺栓材料Alloy-Steel and Stainless
的标准规范
Steel Bolting Materials for
Low-Temperature Service
最小抗拉强度为A 120/105ksi的热处理钢结构螺栓的标准规范
Standard Specification for
Structural Bolts, Steel,
Heat Treated, 120/105 ksi
Minimum Tensile Strength
ASTM
325-2007
ASTM
325M-2005
Standard Specification for
最小抗拉强度为Structural Bolts, Steel,
A 830Mpa的热处理钢Heat Treated 830 MPa
结构螺栓标准规范Minimum Tensile Strength
(米制)
[Metric]
Standard Specification for
淬火和回火合金钢Quenched and Tempered
A 螺栓、螺柱和其它外Alloy Steel Bolts, Studs,
螺纹紧固件的标准and Other Externally
规范
Threaded Fasteners
Standard Specification for
钢制输电塔镀锌螺A Steel Transmission Tower
栓和裸螺栓用标准Bolts, Zinc-Coated and
规范
Bare
ASTM
354-2007
ASTM
394-2007
Standard Specification for
高温用经特殊处理Alloy-Steel Turbine-Type
ASTM A 437/A
的渦轮型合金钢螺Bolting Material Specially
437M-2006
栓材料标准规范
Heat Treated for
High-Temperature Service
通用最低拉伸强度为120/105/90ksi的A
热处理钢制六角头螺钉、螺栓和螺柱用标准规范
Standard Specification for
Hex Cap Screws, Bolts and
Studs, Steel, Heat Treated,
120/105/90 ksi Minimum
Tensile Strength, General
Use
ASTM
449a-2007
Standard Specification for
具有同奥氏体不锈High-Temperature Bolting
ASTM A 453/A 钢相似的膨胀系数Materials, with Expansion
453M-2004
的耐高温螺栓材料Coefficients Comparable to
用标准规范
Austenitic Stainless Steels
ASTM A 最小抗拉强度为Standard Specification for
490-2006
150ksi的热处理合Structural Bolts, Alloy
金钢结构螺栓标准Steel, Heat Treated, 150 ksi
规范
Minimum Tensile Strength
Standard Specification for
结构钢接头用10.9High-Strength Steel Bolts,
A 和10.9.3级高强度Classes 10.9 and 10.9.3,
钢螺栓(米制)标准for Structural Steel Joints
规范
[Metric]
ASTM
490Ma-2004
Standard Specification for
ASTM A 540/A 特殊用合金钢螺栓Alloy-Steel Bolting
540M-2006
材料的标准规范
Materials for Special
Applications
Standard Test Methods for
木和木基制品中螺D Bolted Connections in
栓连接的标准试验Wood and Wood-Base
方法
Products
Standard Specification for
防油防水半嵌入螺F Manhole Cover Assembly
栓连接检查孔盖组Bolted, Semi-Flush,
件标准规范
Oiltight and Watertight
Standard Specification for
防油防水隆起的螺F Manhole Cover Assembly,
栓连接检查孔盖组Bolted, Raised, Oiltight
件标准规范
and Watertight
Standard Specification for
防油防水半嵌入螺Manhole Cover Assembly,
F
栓铰接检查孔盖组Bolted, Semi-Flush,
件
Oiltight and Watertight,
Hinged
Inspection Procedure for
螺栓螺纹锁定厌氧F Use of Anaerobic Thread
复合物使用的检验Locking Compounds with
程序
Studs
F
屈服应力为36、55Standard Specification for
和105ksi的钢制锚Anchor Bolts, Steel, 36, 55,
固螺栓用标准规范
and 105-ksi Yield Strength
ASTM
5652-1995
ASTM
1142-1998
ASTM
1143-1998
ASTM
1144-1998
ASTM
1179-1988
ASTM
1554-2007
ASTM F 120/105KSI最小抗Standard Specification for
1852-2005
张强度的热处理钢制"拧松式"张力控制结构螺栓/螺母/垫圈配件的标准规范
"Twist Off" Type Tension
Control Structural
Bolt/Nut/Washer
Assemblies, Steel, Heat
Treated, 120/105 ksi
Minimum Tensile Strength
ASTM
2280-2006
Standard Specification for
150ksi最低拉伸强"Twist Off" Type Tension
度的热螺纹钢制"扭Control Structural
F
开"型拉伸控制结构Bolt/Nut/Washer
螺栓/螺母/衬垫组件Assemblies, Steel, Heat
的标准规范
Treated, 150 ksi Minimum
Tensile Strength
Standard Specification for
耐热及高温设备用Stainless Steel and Nickel
F 不锈钢和镍合金螺Alloy Bolts, Hex Cap
栓、六角头螺钉和螺Screws, and Studs, for Heat
柱的标准规范
Resistance and High
Temperature Applications
Standard Test Method for
Determining
淬火和回火的螺纹Decarburization and
F 钢螺栓、螺母和螺柱Carburization in Hardened
的脱碳和渗碳性测and Tempered Threaded
定的标准试验方法
Steel Bolts, Screws and
Studs
Standard Test Method for
Determining
Decarburization and
Carburization in Hardened
and Tempered Threaded
Steel Bolts, Screws and
Studs [Metric]
Standard Specification for
Zinc Coating, Hot-Dip,
Requirements for
Application to Carbon and
Alloy Steel Bolts, Screws,
Washers, Nuts, and Special
Threaded Fasteners
ASTM
2281-2004
ASTM
2328-2005
ASTM
2328M-2007
淬火和回火的螺纹钢螺栓、螺钉和螺柱F
的脱碳和渗碳性测定的标准试验方法(米制)
ASTM
2329-2005
碳钢和合金钢螺栓、螺钉、垫圈、螺母和F
特殊螺纹紧固件用热浸镀锌覆层的标准规范
ASTM
2437-2006
与螺旋帽、螺栓、锚和螺柱用碳和合金F
钢可压缩垫圈式直读张力指示器的标准规范
Standard Specification for
Carbon and Alloy Steel
Compressible-Washer-Type
Direct Tension Indicators
for Use with Cap Screws,
Bolts, Anchors, and Studs
ASTM
468-2006
Standard Specification for
一般用途有金属F Nonferrous Bolts, Hex Cap
螺栓、六角头螺钉及Screws, and Studs for
螺柱标准规范
General Use
一般用途有金属F 螺栓、六角头螺钉及螺柱标准规范(米制)
Standard Specification for
Nonferrous Bolts, Hex Cap
Screws, and Studs for
General Use [Metric]
ASTM
468M-2006
ASTM
541-2004
ASTM
593-2002
F 合金钢有眼螺栓的Standard Specification for
标准规范
Alloy Steel Eyebolts
F
不锈钢螺栓,六角头Standard Specification for
螺钉及螺柱标准规Stainless Steel Bolts, Hex
范
Cap Screws, and Studs
ASTM
704-1981
Standard Practice for
管道系统法兰接头F Selecting Bolting Lengths
用螺栓长度选择的for Piping System Flanged
标准实施规程
Joints
F
不锈钢米制螺栓、螺Standard Specification for
钉及螺柱(米制)的Stainless Steel Metric
标准规范
Bolts, Screws, and Studs
Standard Specification for
Surface Discontinuities of
Bolts, Screws, and Studs,
Inch and Metric Series
ASTM
738M-2002
英制及米制系列的ASTM F 788/F 螺栓、螺钉及螺柱的788M-2006
表面不均匀性的标准规范
ASTM
901-1997
Standard Specification for
F 铝制传输塔用螺栓Aluminum Transmission
及螺母
Tower Bolts and Nuts
Standard Practice for
G 大气电流腐蚀用绕Conducting Wire-on-Bolt
线螺栓试验
Test for Atmospheric
Galvanic Corrosion
ASTM
116-1999
IEEE
135.1-1999
编号
(Zinc-coated steel bolts and
C 架空线结构用镀锌nuts for overhead line
钢螺栓和螺母
construction)
中文名称
英文名称
返回
本文发布于:2024-09-21 22:14:38,感谢您对本站的认可!
本文链接:https://www.17tex.com/fanyi/22603.html
版权声明:本站内容均来自互联网,仅供演示用,请勿用于商业和其他非法用途。如果侵犯了您的权益请与我们联系,我们将在24小时内删除。
留言与评论(共有 0 条评论) |