HPE包装指南_12-external-construction-01-03-01

F. EXTERNAL PACKAGINGCONSTRUCTION FEATURESill. 31:example of construction

elements for a case with

wooden board cladding9876543key to numbers used in ill. 311

2

3

4

5

transversal runners

longitudinal runners

bottom boards

header joists

sawn timber cladding

6

7

8

9

diagonalstop cross boardsbattenslid/ sawn timber12between battens and lid:

additional protective layer made from

double sided board or film plus hard

fibre board3.1.2.1 Indications on bottom constructions for construction

types B1 – B3The bottom of a case is its most important load bearing component,

independent of the construction type. Battens, runners, load bearing

bottom boards and/or cross boards must be dimensioned in such a

way that all occurring loads (see chapter B, Load Assumptions) can

be dealt with.56Edition 2/2010

Edition 2/2010ill. 32:illustration of a bottomF. EXTERNAL PACKAGINGCONSTRUCTION FEATURES2341key to the above illustration 32:1 transversal runners 3 header joists2 longitudinal runners 4 botttom boardsThe following principles must be respected:•